Function Key Settings On The Web Interface - Snom D735 User Manual

D735 User Manual
Fig. 15
11. Select Short Label Mode (Fig. 15) and press
12. Specify the content you want the label to display by scrolling to the respective line (Fig. 16) and
to save and return to the Key 17 Function menu (Fig. 15). The default is icon and text;
pressing
you can also select text or icon only — see "Short/Full Label Mode (phone)" on page 68 for more
information.
13. Select Full Label Mode and press
14. Specify the content you want the label to display by scrolling to the respective line and pressing
to save and return to the Key 17 Function menu. The default is icon and text; you can also select
text or icon only — see "Short/Full Label Mode (phone)" on page 68 for more information.
15. Press briefly to return to the Key Function menu; press
screen. When page 3 is on-screen, the top left key can now be used to dial the extension by briefly
pressing the key and to pick up calls ringing on the extension; the LED will indicate the call status
of the extension, i.e., idle, ringing, and in call. See "Example 1, Extension monitoring and call pick-
up" on page 75 for more information on how to configure and use extension monitoring.

Function key settings on the web interface

See "Selected examples for function key programming", below, for the function key mapping and
"Display options for SmartLabel keys" on page 81 for the optical presentation on the display.
Fig. 1
Fig. 16
.
.
73
Configuring the Function Keys
for 3 seconds to return to the idle