NTI XTENDEX 300 Foot DVI Video, Audio and IR Extender
INFRARED CONTROL
Model ST-C6DVI(A)-IR-300 includes ports for connecting an infrared emitter and receiver (included) to work in conjunction with
the IR remote control used to operate the video/audio source.
the emitter to the "IR OUT" port on the Local unit. Position the end of the receiver such that the signal from the remote control
can easily reach the IR sensor.
source.
Note: The IR Emitter and Receiver work within a frequency range of 33-40kHz. Check the
specifications for the device you are extending to make sure the XTENDEX will work with it.
3.5MM Stereo Plug
3.5MM Mono Plug
Figure 5- Connect IR Emitter and Receiver (models with IR support only)
Position the end of the emitter such that the extended signal can be sent to the video/audio
IR-RCVR-3
IR-EMTR-3
Connect the receiver to the "IR IN" port on the Remote Unit and
7
IR Receiver
IR Emitter