Before You Begin - Body Solid GFR500 Assembly Instructions & Owner's Manual

Thank you for purchasing the GFR500!
To maximize your use of the equipment please study this Owner's Manual thoroughly.
Unpacking the Equipment
The GFR500 is carefully tested and inspected before
shipment. Body-Solid ships the unit in several pieces
that require assembly. Ask for assistance during the
assembly process.
Carefully unpack the box and lay the pieces on the floor
near the area where you plan to use the equipment.
Body-Solid continually seeks ways to improve the performance, specifications and product manuals in order to ensure
that only superior products are released from our factories. Please take the time to carefully read through this manual
thoroughly. Instructions contained in this document are not intended to cover all details or variations possible with
Body-Solid equipment, or to cover every contingency that may be met in conjunction with installation, operation, main-
tenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither
the publisher nor the author can accept responsibility for any errors in, or omission from, the information given. Should
additional information be required, or should situations arise that are not covered by this manual, the matter should be
directed to your local Body-Solid representative, or the Service Department at Body-Solid Inc. in Forest Park, Illinois.
B e f o r e Y o u B e g i n
Be careful to assemble all components in the
sequence presented in this guide.
If any items are missing, contact the dealer from whom
you purchased the unit or call 1-800-556-3113 for the
dealer nearest you.
Any Questions?
Call (800) 556-3113
3