D3.2 Display/Edit Mode Switching - Vigilantplant WFC009 User Manual

D3-2
<D3. Configuration Method>
D3.2 Display/Edit Mode Switching
The field wireless access point setup tool has two operation modes: Display, to view the setting
information, and Edit, to configure YFGW510. The setup tool always starts up in Display mode.
To allow for YFGW510 configuration, the mode needs to be switched to Edit.
To change modes, select the [Maintenance] tab as shown in Figure D3-1.
FD0301.ai
Figure D3-1 Maintenance tab
Click the button in the [Display Mode/Edit Mode] field to select the target mode.
If the button reads "Edit Mode", the setup mode is Display. Otherwise, the current mode is Edit.
Clicking the [Edit Mode] button displays a confirmation dialog box as shown in Figure D3-2.
IM 01W02E01-01EN