Vigilantplant WFC009 User Manual page 59

The table below shows the setting items and their default settings.
Item
The number of the port the Infra-
Serial Port
red adapter is connected to
Up to 8 one-byte alphanumeric
Login Password characters or other symbols
(e.g., !,$,#)
In the Serial Port field, enter the COM port number of the Infrared adapter. Open the drop-down
list, then select the COM port number to which the Infrared adapter is connected.
When beginning the program for the first time, enter the default login password in the Login Pass-
word field.
Click the [OK] button. The Change Login Password window as shown in Figure D2-5 will appear
if the field wireless access point setup tool is communicating with YFGW510.
Click the [Cancel] button to exit the setup tool. The window will close.
IMPORTANT
• If the wrong password is entered three times straight, YFGW510 will not accept another
login attempt for 30 minutes. Type in the password carefully.
• Keep the login password safe. It is necessary for setting up the field wireless access point.
After clicking the [OK] button, if there is a problem in communication between the field wireless
access point setup tool and YFGW510, the Error window as shown in Figure D2-4 will appear.
Figure D2-4 Communication Error window
Number of characters
FD0204.ai
<D2. Setup Tool>
Default setting
The smallest COM number
among those devices
yokogawa
D2-5
IM 01W02E01-01EN