Vigilantplant WFC009 User Manual page 61

Figure D2-6 Main window
The Backbone Interface tab of the setup tool's main window is always shown at startup of the set-
up tool. The window is also shown in Display mode with the parameter fields and buttons grayed
out.
Problem with infrared communications
l
If, after login to YFGW510, an infrared communication failure occurs while attempting to access
YFGW510 via the setup tool as described in D3 Configuration Method, the communication error
window shown in Figure D2-4 appears similarly when an error occurs during login to Configura-
tion tool.
After verifying and fixing the problem, click the [OK] button to close the window. In this case, retry
to log in again.
Setup tool operation timeout
l
If there is no operation for five minutes during the configuration of the field wireless access point
setup tool indicate a timeout error shown in Figure D2-7, will appear on top of the main screen. In
this case, retry to log in again.
Figure D2-7 Timeout error window
<D2. Setup Tool>
FD0207.ai
D2-7
FD0206.ai
IM 01W02E01-01EN