・ WLAN specification (redundant communications)
Figure C5-12 Connecting brackets to fasten the WLAN redundant specification antenna
Wireless LAN antenna fastening procedure
Fix the antenna extension cable to the bracket 1 with the provided nut as shown in the figure
above.
Fix the bracket 1 to the 2-inch (2B) pipe by using the provided a pair of U bolts and bracket
2.
Screw the antenna into the antenna connector of the antenna extension cable on the
bracket 1.
Tighten the antenna connector with a torque of 2 to 3 N∙m.
Protect the joint of the antenna and the connector with tape to increase environmental
resistance. For details on taping, see C5.4.1 Mounting ISA100.11a antenna to YFGW510.
YFGW510 does not transmit at the same time from any antenna.
<C5. Wiring>
IM 01W02E01-01EN
C5-14