D3.5 Setting Of Wireless Lan 1 (Wlan C1) - Vigilantplant WFC009 User Manual

D3.5 Setting of Wireless LAN 1 (WLAN C1)
Clicking the [WLAN C1] tab displays the controls and information shown in Figure D3-6.
Figure D3-6 WLAN C1 tab
This tab allows the setting of wireless LAN 1.
The setting items are as follows.
Item
SSID
Security
Encryption
Network Key
Band
Channel
Data Rate
SSID setting
l
The SSID for the Field Wireless Access Point has the following restrictions:
• Up to 31 characters
• Single-byte, alphanumeric characters and other marks and signs (e.g., "!", "$", "#")
Wireless LAN identification code. Enter the same value as the SSID of wire-
less LAN access point being connected.
Display-only, security method
Display-only, encryption method
Encryption key. Enter the same value as the encryption key of wireless LAN
access point being connected.
Wireless LAN frequency band. Select either 2.4 GHz or 5 GHz.
Wireless LAN channel. Select the channel to be used in wireless LAN. The
selectable channels vary depending on the frequency band. For details,
see Band and channel setting regulation.
Wireless LAN communication data rate. Select the data rate of wireless
LAN. The selectable data rates vary depending on the frequency band. For
details, see Data rate setting regulation.
<D3. Configuration Method>
Descriptions
D3-8
FD0306.ai
Initial Value
Blank
WPA2-PSK
AES
Blank
"2.4 GHz"
"Auto"
"Auto"
IM 01W02E01-01EN