D3.7 Setting Of Wlan Redundancy - Vigilantplant WFC009 User Manual

D3.7 Setting of WLAN Redundancy
Clicking the [WLAN Redundancy] tab displays the controls shown in Figure D3-8.
Figure D3-8 WLAN Redundancy tab
This tab allows the setting for wireless LAN redundancy.
The setting items are as follows.
Item
Initial Port
Path Switch
Hysteresis
After entering all the required items, click the [Save] button to store settings in YFGW510.
Select a wireless LAN port to be used at startup. If "AUTO" is set, a
wireless LAN port with high RSSI is automatically selected.
Select the communication path switching standard. YFGW510 supports
RSSI.
If RSSI is selected for the communication path switching standard,
specify the hysteresis width in dB.
<D3. Configuration Method>
Descriptions
D3-11
FD0308.ai
Initial Value
"AUTO"
"RSSI"
30
IM 01W02E01-01EN