D2.1.3 Connection Example - Vigilantplant WFC009 User Manual

D2.1.3 Connection Example
To use the setup tool, infrared communication between the PC and YFGW510 is required.
Connect the Infrared adapter to a USB port on the PC. Place the Infrared adapter close to the
infrared photoreceiver of YFGW510 and ensure that they face each other. For distance between
YFGW510 and the Infrared adapter, see the table below.
Field wireless access point setup tool
Figure D2-1 Connection example for field wireless access point setup tool
Table D2-4 Communications distance between YFGW510 and Infrared adapter
Recommended communications distance
Maximum communications distance
Item
Within 20 cm
30 cm
<D2. Setup Tool>
Field Wireless Access Point
Infrared adapter
Communications distance
D2-2
FD0201.ai
IM 01W02E01-01EN