C4. Mounting
Mount YFGW510 on the 2-inch (2B) pipe, placed vertically or horizontally, using the dedicated
bracket. YFGW510 is accessed through its four or six sides. Make sure that the mounting pipe,
the device, connectors or cables will not interfere with radio wave signals. This is achieved by us-
ing the dedicated bracket. YFGW510 does not support any other mounting method.
Mounting on vertical pipe (Communications interface: 100BASE-
n
TX/100BASE-FX)
Figure C4-1 Mounting on vertical pipe (Communications interface: 100BASE-TX/100BASE-FX)
Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-
bolts.
For wiring procedure using cable connectors, see the section on wiring.
<C4. Mounting>
FC0401.ai
IM 01W02E01-01EN
C4-1