Part-G. Specifications; G1. Standard Specifications; G1.1 Communication Interface Specifications - Vigilantplant WFC009 User Manual

PART-G. SPECIFICATIONS

G1. Standard Specifications

G1.1 Communication Interface Specifications
Item
Communication Standard
Interface
Frequency
Raw data rate
Radio Security
RF Transmitter
Power
Connector
Cable Type
Antenna
Remote Antenna
Maximum length
Port
Protection
Communication Field Wireless
Protocol
Management,
configuration, etc.
*1: In outdoor wiring to Field Network or 100BASE-FX of Field Wireless Backbone, use optical fiber cables with a
nonmetallic tension member, combining with YFGW610
*2: This product requires a wireless LAN access point for connection with YFGW410 in the wireless LAN in field wireless
backbone.
*3: 2-pole SC connector cannot be used due to the conduit hole size limitation. SC connector should use Short Boot type.
*4: The maximum length needs perfect conditions without an obstruction for radio wave transmission, using a standard
antenna (2dBi). The maximum length changes with the environmental conditions and installation situations of a site.
*5: Installation of these multiple product and YFGW410 in one field wireless subnet requires direct connection or the
connection via IEEE1588PTP basis products.
*6: TCP based custom protocol used for communication between this product and YFGW410.
Communication interface specifications for YFGW510 configuration
n
Interface
Infrared communication
Field Network
Specifications
IEEE802.15.4
2400–2483.5MHz
250kbps
AES128bit
Max 10dBm
N type
coaxial
+2dBi
+2dBi, +6dBi, +9dBi
500m
*4
1 port
–
ISA100.11a
–
Item
Communication protocol
Wavelength
Maximum transmission speed 9600 bps
Maximum transmission
distance
Number of ports
Purpose
<G1. Standard Specifications>
Field Wireless Backbone Specifications
IEEE802.11a/b/g 100BASE-TX
*2
b/g: 2400-2483.5MHz –
a: 5150-5850MHz
1~54Mbps 100Mbps
WPA2-PSK –
Max 15dBm –
N type RJ-45
coaxial Category 5
– –
+2dBi, +6dBi, +9dBi –
b/g: 500m 100m
*4
a: 200m
*4
Max 2 port 1 port
– Surge
–
IEEE1588PTP v2 , Proprietary
*5
External Specifications
IrDA-SIR Ver. 1.2
870 nm
30 cm
1
Initial configuration of YFGW510
G1-1
*1
100BASE-FX
100Mbps
SC connector
[ single pole × 2 ]
*3
Multimode fiber
(50/125μm or
62.5/125μm)
2000m
1 port
–
*6
Remarks
IM 01W02E01-01EN