D3.3 Backbone Interface - Vigilantplant WFC009 User Manual

D3.3 Backbone Interface
The [Backbone Interface] tab allows a change in settings for the YFGW510 connection to the
field wireless backbone network. Figure D3-3 shows the [Backbone Interface] tab in Edit mode.
Figure D3-3 Backbone Interface tab
The following are items that need to be set inYFGW510.
Item
Device Tag
Use Factory Default
Password
Password
Device tag setting regulation
l
The device tag for the Field Wireless Access Point has the following restrictions. No string out-
side of these restrictions can be accepted.
• Up to sixteen characters
• Alphanumeric characters, hyphens and underscores only
• Single-byte, uppercase only
Descriptions
Enter the YFGW510 device tag.
Select whether to use the factory-set default password for the
connection to YFGW410. If checked, the factory-set default pass-
word will be used.
If the [Use Factory Default Password] checkbox is not selected
(the default password is not used), enter any password.
<D3. Configuration Method>
D3-4
FD0303.ai
Initial Value
Blank
Checked
Blank
IM 01W02E01-01EN