C4. Mounting
Mount YFGW510 on the 2-inch pipe, placed vertically or horizontally, using the dedicated brack-
et. Make sure that the 2-inch pipe, the device, connectors or cables will be interfered each other,
because YFGW510 is accessed through its four or six sides. YFGW510 does not support any
other mounting method.
Mounting on vertical pipe (Communications interface: 100BASE-
n
TX/100BASE-FX)
Figure C4-1 Mounting on vertical pipe (Communications interface: 100BASE-TX/100BASE-FX)
Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-
bolts.
For wiring procedure using cable connectors, see the section on wiring.
<C4. Mounting>
FC0401.ai
IM 01W02E01-01EN
C4-1