Installing An Rru Rf Jumper - Huawei RRU5303 Installation Manual

RRU5303
Installation Guide
Figure 8-15 Correct position of an OT terminal
Step 3 Label the installed cables according to the instructions in Attaching a Cable-Tying Label.
----End

8.6 Installing an RRU RF Jumper

This section describes the procedure for installing an RRU RF jumper.
Context
For details about connections between RRU ports and antenna ports, see the RF cable
connection section for the corresponding RRU in RRU Hardware Description.
Procedure
Step 1 Connect the 4.3-10 straight male connector on the RRU RF jumper to the antenna port, and
use a torque wrench to tighten the connector to 5 N· m (44.25 lbf· in.) to 15 N· m (132.74
lbf· in.), as shown in Figure 8-16.
Issue Draft B (2018-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing RRU Cables
101