Table of Contents
Advertisement
RRU5303
Installation Guide
Context
Figure 7-22 shows the top view of an RRU installed on U-steel.
When the width of the narrower edges of the U-steel is less than 40 mm (1.57 in.), only the a
and b modes are supported.
Figure 7-22 Top view of an RRU
(1) U-steel
Procedure
Step 1 Determine a position for installing the mounting kits.
Issue Draft B (2018-05-15)
Do not stand an RRU upright because the RF ports cannot support the weight of the RRU.
Place a foam pad or cardboard under an RRU to protect the RRU housing from damage
during the installation.
If the RRU is installed on a tower, determine a position for installing the mounting kits
according to the instructions in 3.5.1 Clearance for a Single RRU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing the RRU
63
Advertisement
Table of Contents
