Installing An Rru Rf Jumper - Huawei RRU3269 Installation Manual

RRU3269
Installation Guide
Connect the M6 OT terminal at one end of the PGND cable to the ground terminal at the RRU
bottom and the M8 OT terminal at the other end to the external ground bar, as shown in
7-11.
Figure 7-11 Installing an RRU PGND cable
Figure 7-12 Correct position of an OT terminal
Step 3 Label the installed cable according to the instructions in Attaching a Cable-Tying Label.
----End

7.6 Installing an RRU RF Jumper

This section describes the procedure for installing an RRU RF jumper.
Issue Draft A (2014-10-31)
NOTE
Crimp OT terminals in correct positions, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing RRU Cables
Figure 7-12.
Figure
46