Opening The Cover Plate Of An Rru Cabling Cavity - Huawei RRU5303 Installation Manual

RRU5303
Installation Guide
(1) Waterproof tape
----End

8.8 Opening the Cover Plate of an RRU Cabling Cavity

This section describes the procedure for opening the cover plate of an RRU cabling cavity.
Procedure
Step 1 Wear ESD gloves.
Take proper ESD protection measures, for example, wear ESD gloves, to prevent electrostatic
damage to the boards, modules, or electronic components.
Issue Draft B (2018-05-15)
Figure 8-22 Waterproofing the connector on the AISG multi-wire cable
f. Route the cables according to the instructions in 8.1 Cabling Requirements.
g. Label the installed cables according to the instructions in Attaching an L-Shaped
Label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) PVC insulation tape
8 Installing RRU Cables
108