Table of Contents
Advertisement
RRU5303
Installation Guide
Figure 11-3 Stripping the specified length of sheath
Step 3 Strip a specified length of sheath off each core wire. The length must be consistent with the
length of the notch in the female connector (Pressfit Type), as shown in Figure 11-4.
Figure 11-4 Stripping the sheath off each core wire
Figure 11-5 Matched length
Step 4 Add a female connector (pressfit type) to two core wires.
1.
Issue Draft B (2018-05-15)
Loosen the screws using a Phillips screwdriver, as shown in Figure 11-6.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Appendix
124
Advertisement
Table of Contents
