Rigging - PROEL DREAMLIGHT 250 ECLIPSE WASH User Manual

RIGGING

DANGER TO LIFE: Please consider the respective national norms during the
installation. The installation must only be carried out by an authorized dealer.
The installation must always be secured with a secondary safety attachment, e.g.
an appropriate catch net. This secondary safety attachment must be constructed
in a way that no part of the installation can fall down if the main attachment
fails.
When rigging, derigging or servicing the fixture staying in the area below the
installation place, on bridges, under high working places and other endangered
areas is forbidden.
The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert before taking into operation for the first
time and after changes before taking into operation another time.
The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert after every four year in the course of an
acceptance test.
The operator has to make sure that safety-relating and machine-technical
installations are approved by as killed person once a year.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including
(but not limited to) calculating working load limits, installation material being
used, and periodic safety inspection of all installation material and the
projector. If you lack these qualifications, do not attempt the installation
yourself, but instead use a professional structural rigger. Improper installation
can result in bodily injury and/or damage to property.
The projector has to be installed out of the reach of people.
If the projector shall be lowered from the ceiling or high joists, professional
trussing systems have to be used. The projector must never be fixed swinging
freely in the room.
CAUTION: projectors may cause severe injuries when crashing down! If you have
doubts concerning the safety of a possible installation, do NOT install the
projector.
26