Operating Condition - PROEL DREAMLIGHT 250 ECLIPSE WASH User Manual

HEALTH HAZARD: Never look directly into the light source, as sensitive persons
may suffer an epileptic shock (especially meant for epileptics)!
Do not switch the device on and off in short intervals as this would reduce the
lamp's life. Please consider that damages caused by manual modifications to the
device are not subject to warranty.
Keep away children and amateurs!

OPERATING CONDITION

This device is a moving-head wash for creating decorative effects. This product
is only allowed to be operated with an alternating current of 230V - 50Hz (120V -
60Hz) and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques,
theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation
breaks will ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the
device.
Never lift the fixture by holding it at the projector-head, as the mechanics may
be damaged. Always hold the fixture at the transport handles.
The minimum distance between light-output and the illuminated surface, must
be more than 1 meter.
When choosing the installation-spot, please make sure that the device is not
exposed to extreme heat, moisture or dust. There should not be any cables lying
around. You endanger your own and the safety of others!
Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the
correct holes only.
Only operate the fixture after having checked that the housing is firmly closed
and all screws are tightly fastened.
23