Cleaning And Maintenance; Fuse Replacing - PROEL DREAMLIGHT 250 ECLIPSE WASH User Manual

CLEANING AND MAINTENANCE

CAUTION: Disconnect from mains before starting maintenance operation!
It is absolutely essential that the fixture is kept clean and that dust, dirt and
smoke-fluid residues must not build up on or within the fixture. Otherwise, the
fixture's light-output will be significantly reduced. Regular cleaning will not only
ensure the maximum light-output, but will also allow the fixture to function
reliably throughout its life.
Please use a moist, lint-free cloth. Never use alcohol or solvents!
CAUTION: The lens has to be replaced when it is obviously damaged, so that its
function is impaired, e. g. due to cracks or deep scratches!
The Fresnel lens will require weekly cleaning as smoke-fluid tends to building up
residues, reducing the light-output very quickly. The cooling-fans should be
cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-
cleaner or an air-jet. The dichroic colour-filters should be cleaned monthly.
There are no serviceable parts inside the device except for the lamp and the
fuse. Maintenance and service operations are only to be carried out by
authorized dealers.

FUSE REPLACING

Only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
PROCEDURE
Unscrew the fuse holder on the rear panel with a fitting screw driver from the
housing
Remove the old fuse from the fuse holder.
Install the new fuse in the fuse holder.
Replace the fuse holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced
by authorized dealers.
For any further questions, please contact your dealer.
34