INDICE TABLE OF CONTENTS..............3 CARATTERISTICHE GENERALI............4 CARATTERISTICHE TECNICHE ............5 ISTRUZIONI GENERALI ..............5 UTILIZZO SICURO ED EFFICIENTE ..........5 AVVERTENZE .................. 6 CONTROLLO E FUNZIONI ............... 6 Pannello frontale ................6 GUIDA AL FUNZIONAMENTO............7 Modalità MUSICALE ..............7 Modalità...
TABLE OF CONTENTS GENERAL FEATURES ..............10 TECHNICAL SPECIFICATION ............11 GENERAL INSTRUCTIONS............11 SAFE AND EFFICIENT USE ............11 PRODUCT CARE ................12 CONTROL AND FUNCTION ............12 Front panel................... 12 OPERATION GUIDE ............... 13 Sound Mode................. 13 Automatic Mode ................13 Connection with a DMX controller..........
CARATTERISTICHE GENERALI Grazie per l’acquisto del LED PAR 36. Questo modello è un faretto LED a 4 canali e possiede una varietà di caratteristiche che includono: Porta DMX IN / OUT standard a 3 poli per ricevere segnali • DMX 512 da una centralina esterna e collegare più faretti in serie;...
Per la riparazione consultare sempre personale autorizzato. caso problemi funzionamento cessare • immediatamente l’utilizzo, disconnettere presa dell’alimentazione e rivolgersi al proprio rivenditore per un controllo oppure contattare direttamente la PROEL Spa. Per prevenire rischi di incendio o di shock elettrico, non •...
esporre il prodotto alla pioggia o all’umidità. Evitare di eseguire la riparazione. Eventuali interventi da parte • di personale non qualificato potrebbero provocare danni o il funzionamento difettoso. AVVERTENZE Questo prodotto è destinato all’esclusivo utilizzo interno. • Disconnettere la presa di alimentazione quando l’unità non •...
GUIDA AL FUNZIONAMENTO MODALITÀ MUSICALE Per attivare la modalità musicale del PAR LED, posizionare lo switch 9 su ON. Cambiare la posizione degli switch da 1 a 8 per avere l’effetto desiderato. MODALITÀ AUTOMATICA Posizionando gli switch 9 e 10 in OFF, il PAR LED funzionerà in modalità...
Page 8
Dipswitches 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON 8 ON 9 ON Valore Il PAR LED è caratterizzato da 4 canali per il controllo. Le rispettive funzioni sono descritte nella tabella seguente: CANALE FUNZIONE 0 –...
MODALITÀ SLAVE Affinché il PAR LED funzioni in modalità slave, impostare lo switch 10 su ON e lo switch 9 su OFF. Il proiettore funzionerà così da slave quando viene collegato ad un altro faretto master o in modalità DMX con indirizzo 1 se viene collegato ad una centralina DMX.
GENERAL FEATURES Thank you for your purchase. This unit is a 4 channels LED PAR 36 and it is featured by: 3 pin standard DMX IN / OUT ports providing to • communicate with a external controller and with others PLLEDSP units.
TECHNICAL SPECIFICATION Power input AC 230V / 50 Hz – AC 120V / 60 Hz Power DMX In/Out 3 pin XLR sockets Dimensions (mm) 195×154×130 Weight (kg) 1,07 Operative conditions Temperature: -10°C ∼ 35°C. Humidity: < GENERAL INSTRUCTIONS Please read through this operating instructions before installing or using your new product.
PRODUCT CARE This product is intended for indoor use only. • Provide occasional ventilation during use. • Unplug the power plug from the sockets when not using the • unit for extended period. Do not use the unit in places subject to excessive humidity, •...
OPERATION GUIDE SOUND MODE Set the No. 9 on the ON position to active the Sound Mode. Combine the position of the switches from No. 1 to No. 8 to select the desired effect. AUTOMATIC MODE Set the switches No. 9 and the No. 10 on the OFF position, the LED PAR will work in automatic mode.
Page 14
Dipswitches 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON 8 ON 9 ON Value Each LED PAR needs four loops of DMX-512 to control, the table of the loop control function. The relative functions are described in the following tab: CHANNEL FUNCTION...
resistor connected across pins 2 and 3, which is then plugged into the DIGITAL THRU socket on the last projector in the chain. SLAVE MODE To enable the Slave Mode, set the No. 10 switch on the ON position and No. 9 switch on the OFF position. The projector will work in Slave Mode when it is connected to an other projector which is in Master Mode or it will work in DMX Mode (with address No.1) if it is connected to a DMX controller.