Setting Up A Dmx Serial Data Link; Master/Slave Fixture Linking; Mounting; Operating Instructions - PROEL PLLEDMLW18 User Manual

3.4 Setting up a DMX serial data link

at first link the first light and DMX control through XLR-connection signal cable, then
connect the light in series as the follow

3.5 Master/Slave fixture linking

1.Connect the (male) 3 pin connector side of the DMX cable to the output (female)3pin
connector of the first fixture.
2.Connect the end of the cable coming from the first fixture which will have a (female)3
pin connector to the input connector of the next fixture consisting of a (male) 3 pin
connector. Then, proceed to connect from the output as stated above to the input of the
following fixture and so on.
3.6 orientation
This fixture may be mounted in any position provided there is adequate room for
ventilation.

4. Operating instructions

4.1 Navigating the control panel

Access control panel functions using the four panel buttons located directly under the
LCD Display.
Button
Used to access the menu or return to a
<MENU>
Scrolls through menu options in descending
<DOWN>
Scrolls through menu options in ascending
<UP>
Used to select and store the current menu or
<ENTER>
When a menu function is selected, the display will show immediately the first available
option for the selected menu function. To select a menu item, press<ENTER>.
Press the <MENU> button repeatedly until you reach the desired menu function. Use the
<UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER> button
to select the menu function currently displayed, or to enable a menu option. To return to
the previous option or menu without changing the value, press the <MENU> button.
Function
previous menu option.
order.
order.
option within a menu.
14
120