Operating Determinations - PROEL TARKUS 575 SPOT User Manual

and all connections with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power-cord by the plug. Never pull out the plug by tugging the power-
cord.
During the initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective.
CAUTION: During the operation, the housing becomes very hot.
DANGER OF BURNING: Never install the device on a highly flammable surfaces (e.g.
fair carpet).
HEALTH HAZARD: Never look directly into the light source.
Keep away children and amateurs.

OPERATING DETERMINATIONS

This device is a moving-head spot for creating decorative effects. This product is only
allowed to be operated with an alternating current of 230V, 50Hz (117V – 60Hz – US
model for USA) and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres
etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks
will ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
Never lift the fixture by holding it at the projector-head, as the mechanics may be
damaged. Always hold the fixture at the transport handles.
When choosing the installation-spot, please make sure that the device is not exposed to
extreme heat, moisture or dust. There should not be any cables lying around. You
endanger your own and the safety of others.
The symbol --- m determines the minimum distance from inflammable objects. The
minimum distance between light-output and the illuminated surface must be more than
this value.
Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct
fixation points only. The safety rope must never be fixed at the transport handles.
18