Specifying End Receivers - Gestetner F104 Supplementary Manual

Specifying End Receivers

You can only specify End Receivers
already programmed in a Quick Dial
key, Speed Dial, or Group Dial of the
designated Transfer Station.
❖ ❖ ❖ ❖ Quick Dial
Enter the number (two or three
digits) of the Quick Dial where the
End Receiver is stored. For exam-
ple, to choose the number stored in
Quick Dial 001 in the Transfer Sta-
tion, enter: { { { { 0} } } } { { { { 0} } } } { { { { 1} } } } .
Note
❒ If the Transfer Station only sup-
ports two digits for the Quick
Dials, enter the number with
two digits like { { { { 0} } } } { { { { 1} } } } .
❖ ❖ ❖ ❖ Speed Dial
Enter { { { { p p } } } } followed by the Speed
p p
Dial code (two or three digits).
For example, to select the number
stored in Speed Dial 012 in the
Transfer Station, enter: { { { { p
{ { { { 1} } } } { { { { 2} } } } .
Note
❒ If the Transfer Station only sup-
ports 2 digits for the Speed Di-
als, enter the number with two
digits like, { { { { p p } } } } { { { { 1} } } } { { { { 2} } } } . p p
❖ ❖ ❖ ❖ Group Dial
Enter { { { { p p } } } } , { { { { p p p p } } } } followed by the p p
Group number (2 digits).
For example, to select the number
stored in Group 04 in the Transfer
Station, enter: { { { { p p } } } } { { { { p p p
p } } } } { { { { 0} } } }
p p
p } } } } { { { { 0} } } } { { { { 4} } } } . p p
Transfer Request
4
87