Gestetner F104 Supplementary Manual page 107

Note
❒ When specifying a destination
using IP address, you may need
to give the port number too, de-
pending on network settings at
the receiving end. For example, if
the destination IP address is
192.168.1.10 and the port number
is 2100, you should identify the
destination as 192.168.1.10:2100.
Contact your network adminis-
trator for details.
❒ When specifying a destination
using the host name, you may
need to give the port number
too, depending on network set-
tings at the receiving end. For
example, if the destination host
name is "abc.company.com" and
the port number is 2100, you
should identify the destination
as "abc.company.com:2100".
Contact your network adminis-
trator for details.
❒ When specifying a destination
using host name, set the DNS
Server Address beforehand.
❒ To enter texts registered in
"Template: Address", press the
{ { { { #} } } } key, press the 0 or 1 key
to display the desired text, and
then press the { { { { OK} } } } key. See
p.147 "Registering Template
Addresses".
D D D D
Press the 0 0 0 0 or 1 1 1 1 key to display
"2. IP-Fax Address".
Note
❒ If the Network Transmission
Auto Check function is turned
off, the display does not appear.
Proceed to step
"User Parameters" (switch 32,
bit 1).
E E E E
Press the { { { { OK} } } } key.
F F F F
If you want to specify another
destination, press the { { { { OK} } } } key,
and then repeat steps
Note
❒ If you do not want to specify
other destination, proceed to
G
step .
G G G G
Press the { { { { Start} } } } key.
IP-Fax transmission begins.
Transmitting IP-Fax
F
. See p.166
B B B B E E E E
to .
99
5