Gestetner F104 Supplementary Manual page 71

❒ You can adjust the quality of imag-
es transmitted using the Color
Scanning feature with user param-
eters. If you make a setting that re-
duces the difference between
values for Brightness and Color
Difference (for example, "Bright-
ness: 1, Color Difference: 1, Color
Difference: 1"), the quality of imag-
es increases, but the data size also
increases. You do not need to make
changes to default settings. For
more information, see p.166 "User
Parameters" (switch 33: bit 1,0).
However, this setting is not valid
when PDF is selected as the file for-
mat for Color Scanning with user
parameters (switch 17, bit 5).
❒ You can adjust the color balance.
See p.67 "Scanner RGB".
❒ Adobe Acrobat Reader is neces-
sary for viewing PDF files.
❒ The following functions are in-
valid even if you specify them:
• Fax Header Print
• Label Insertion
• Maximum Mail Size
• Viewer URL Information
A A A A
Make sure the Memory Trans. in-
dicator is not lit.
Note
❒ If the Memory Trans. indicator
is lit, press the { { { { Memory Trans.} } } }
key.
B B B B
Press the { { { { Color Scan} } } } key.
Make sure the Color Scan indica-
tor is lit.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key to select the
original size, and then press the
{ { { { OK} } } } key.
D D D D
Make any settings for "Mail Op-
tions", if necessary.
Note
❒ Proceed to step
want to make any Mail Options
settings.
Using { { { { Trans. Option} } } } Key
A Press the { { { { Trans. Option} } } } key.
ZHMS300E
Scanning a Color Original
ZHMS290E
F
if you do not
ZHMS280E
3
63