Gestetner F104 Supplementary Manual page 46

Getting Started
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key to try again.
❒ The SMTP server can also be
specified as a domain. In this
case, you must specify the DNS
server address beforehand.
2
❒ You can enter up to 127 char-
acters for a domain.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
POP Server
Enter the IP address of the POP
server.
The POP server is the server that
receives e-mail over the Internet.
If you use IMAP4 server, specify
the IMAP4 address in the following
procedure. Also, you need to set
IMAP4 with user parameters. See
p.166 "User Parameters"(switch
17, bit 6).
Consult your systems administrator
if you are unsure about this setting.
A Enter the POP server address
using the number keys.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key to try again.
❒ The POP server can also be
specified as a domain. In this
case, you must specify the DNS
server address beforehand.
❒ You can enter up to 127 char-
acters for a domain.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
38
Mail Address
Enter the mail address of NIC
FAX.
Consult your systems administra-
tor if you are unsure about this set-
ting.
A Enter the mail address.
Note
❒ You can enter up to 127 char-
acters for a mail address.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.
Account Name
Enter the account name to be used
for connection to the POP server.
Consult your systems administra-
tor if you are unsure about this set-
ting.
A Enter the account name.
Note
❒ You can enter up to 31 char-
acters for an account name.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
The display returns to the Mail
Server settings menu.