Using Scanrouter V2 Professional - Gestetner F104 Supplementary Manual

Introduction

Using ScanRouter V2 Professional

Preparation
You need to adjust "Network" settings beforehand. Also, you need to contact
1
your service representative for the setup.
A Read precautions to use ScanRouter V2 Professional with NIC FAX. See p.122
"Setting up ScanRouter V2 Professional".
B Install ScanRouter V2 Professional on the computer server. See ScanRouter V2
Professional Setup Guide.
C Register the IP address or the host name of the ScanRouter V2 Professional
server with NIC FAX, and then assign the Scanner (Scan to E-mail) function
to a user function key. If your machine is Type 2, the Scanner (Scan to E-mail)
function is pre-assigned to the { { { { F10} } } } key. See p.41 "Scanner Server", p.26 "As-
signing User Function Keys", and Chapter 6 "User Function Keys", Advanced
Features.
D Adjust necessary settings in the computer where ScanRouter V2 Professional
is installed, and then set up destinations. See ScanRouter V2 Professional Man-
agement Guide.
E
Transmit the data from NIC FAX. See p.117 "Delivering Scanned Data".
20
GFLNFX4E