Gestetner F104 Supplementary Manual page 57

Note
❒ If you use the Network Boot
function, specify the host name,
as the NIC FAX IP address may
change. In this case, you need to
make the following settings to
search for NIC FAX by host
name:
• When you use the DNS serv-
er:
The DNS server settings
must be made on the com-
puter on which LAN-Fax
Driver is being installed.
• When you use the WINS
server:
The settings of the WINS
server must be made the
same as those on the comput-
er on which LAN-Fax Driver
is being installed, and NIC
FAX.
Reference
p.31 "Network Boot"
p.32 "WINS Server"
M M M M
Check to see if [TCP/IP] is selected
and the machine's port name is
displayed correctly, and then
click [OK].
N N N N
Click [Continue].
Install starts.
O O O O
Click [Finish].
P P P P
To restart the computer, click [Yes.
Restart right now.]
Note
❒ If you do not want to restart the
computer, click [No. Restart later.]
❒ If the [Confirm restart] area does
not appear, proceed to step
Q Q Q Q
Click [Finish].
If you click [Yes. Restart right now.]
P
in the step display, installation
completes and the computer re-
starts.
Installing the Software
Q
.
49
2