Setting The Off-Mode (Auto Shutoff) - Gestetner CS331 Copying Manual

14. SETTING THE OFF-MODE (AUTO SHUTOFF)

This function allows the copier to automatically turn its power OFF when it is left inactive for a specified
1
period of time. When the power is supplied to the optional printer controller, the copier will go into the
sleep mode and it will stand by with the minimum power consumption.
2
1
Press the
menu, and press the AUTO SHUT OFF key.
3
- If the key for the desired function is not shown, press the
Next key to switch the screen.
4
5
2
Select the period of time (in minutes) on the display
allowed before the off-mode (the sleep mode if power
is being supplied to the optional printer controller)
6
is activated.
- The setting procedure finishes and the display returns to
the program menu screen.
- The default setting is 'OFF'.
7
If you do not want to use the Off-mode, select the OFF key.
8
Clearing the Off-Mode/Sleep Mode
9
Turn ON the power switch once again when the copier is in the
off-mode. Press the
copier starts to warm itself up.
10
11
12
6-34
USING THE SPECIAL FUNCTIONS
PROGRAM key to enter the program
START key during the sleep mode. The