General Copying Procedures - Gestetner CS331 Copying Manual

1. GENERAL COPYING PROCEDURES

1
After setting (confirming) paper in the drawers, place the originals. When the
with any settings unchanged, copies are made in the initial (default) settings (*1). You can make copies
as desired by setting different copy modes.
2
The initial (default) settings of the copier at the time of installation
are as shown on the right.
*1 The copy modes that are automatically set when the power
is turned on, when the energy-saving mode is cleared or
3
when the
control panel are called the initial (default) settings.
*2 This is displayed when the reversing automatic document
feeder (optional) is installed.
4
1 Place paper in the drawer(s).
5
- Acceptable copy paper
6
When the desired paper is not set in any of the drawers or the
large-capacity feeder (optional):
- Setting the drawer
- Bypass copying
7
2 Place the originals.
- Acceptable originals
- When placing an original on the glass
8
- When using the reversing automatic document feeder
(optional)
3 Select the copy modes
on the right)
9
- Use the color mode selection key, the touch panel and the
digital keys.
10
- Any copy modes cannot be changed after the
is pressed (including the case when originals are divided into
multiple sets when fed).
11
- Selecting multiple copy modes may be restricted depending
on their combination.
4
Press the
12
on the right)
- When the reversing automatic document feeder is used and
the continuous feed mode is selected(
begins.
2-2
HOW TO MAKE COPIES
FUNCTION CLEAR key is pressed on the
Copying Procedure
Page 2-4
Page 2-6
Page 6-5
Page 2-9
Page 2-11
( in the illustration on the page
.
Page 11-11, 11-12
START key
( in the illustration on the page
.
Initial (default) settings
Full-color mode
Reproduction ratio ........... 100%
Copy quantity .................. 1
Automatic paper selection
1-sided copies from 1-sided originals
Manual image density
Text/photo mode (original image type)
Sheet bypass ........ plain paper
Non-sort Non-staple mode
Continuous original feed mode (*2)
Page 2-10
START key
Page 6-2), copying
START key is pressed