Call Service Symbol - Gestetner CS331 Copying Manual

8. CALL SERVICE
When the CALL SERVICE
1
possible. Call your service technician.
Call for service
2
When the CALL SERVICE
3
the digital key 8 together, the corresponding error code will appear on the copy quantity display only
while both keys are held down. Please give the error code in addition when you are asking for service.
4
Since heaters are used to fix toner images to the copy paper, a safety circuit is incorporated in this
copier. After you turn on the power switch, if a certain temperature is not attained within a specified
5
period of time, the safety circuit assumes that something abnormal has happened, causing the copier
to stop its operation. This can possibly occur when the temperature is low even if the copier is not
malfunctioning. If this occurs, turn the power switch off and then on again. Repeat this procedure twice,
and if the problem still persists, turn off the power switch and call for service.
6
Caution
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get
7 an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal parts of the
equipment.
8
9
10
11
12
9-26
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
SYMBOL
symbol flashes, the following message appears and copying is no longer
or CLEAR PAPER symbol is flashing, if you press the C Clear key and