Touch Panel - Gestetner CS331 Copying Manual

1. DESCRIPTION OF THE DIGITAL COLOR COPIER AND THE OPTIONAL EQUIPMENT (Cont.)

Touch Panel

When the power is turned on, the following basic screen is shown on the touch panel. (If each department is
1
controlled by an access code, a different screen is displayed.
On the screen, currently set functions, selected functions and the copier status are shown using messages
and illustrations.
* The contents of the touch panel screens in this manual show a copier equipped with a complete range of
2
options.
3
4
Function setting area
5
6
7
The following information is shown on the touch panel:
Copier status, operational instructions, cautionary messages, reproduction ratios, total copy quantity,
paper type and color modes.
- Paper type
8
If THIN, THICK1 paper or OHP films are set in the drawer (
Page 2-7), or any special sheets are set on the sheet bypass
( Page 6-11), the selected paper type is displayed on the
top right of the screen.
9
10
The various function items are touch-key selectable. Press any key lightly with your finger.
- Index keys
Used for switching between the Basic, Color, Editing and Program menu.
- Function setting area
11
This is where you select or set various functions.
12
1-6
BEFORE MAKING COPIES
Reproduction ratio
Message
Index keys
Message Display
Touch-keys
Page 1-9)
Paper type
Total copy
Selected color mode
quantity
Set functions confirmation key
THICK 1, 2, 3, 4
THIN SPECIAL OHP FILM