Gestetner CS331 Copying Manual page 125

4
Press the CALIBRATION key.
If you want to return the image quality level to the default
setting, press the DEFAULT key.
5
The chart is printed out.
6 When the display on the right appears, place the chart
face down on the glass and with its bottom toward
you and its top left aligned against the original scale
on the left side, in order that the black line be placed
at the left side.
7
Press the START key.
- When the message "READY" appears, the entire operation
is completed.
If the chart is not properly placed, the following message
appears:
Set chart correctly
Go back to step 6 and place the chart again.
1
2
3
4
5
6
7
8
9
10
11
12
6-31