Gestetner CS331 Copying Manual page 121

Changing an Access Code / Changing the Limit Number of Outputs by an Access Code
4
Using the digital keys, enter the current access code
(5 digits) of the department you want to change, and
press the SET key.
5
Press the ID CHANGE or LIMITATION key.
- When the ID CHANGE key is selected, go to step 6 on the
next page; when the LIMITATION key is selected, go to
step 7 and following steps.
When the ID CHANGE key is selected in step 5:
6
Using the digital keys, enter a new access code (5
digits) into the fields of NEW ACCESS CODE and
CONFIRM ACCESS CODE, and press the SET key.
- You cannot enter an access code which has already been
registered. The administrator password and '00000' are
invalid.
When the LIMITATION key is selected in step 5:
7 Key in a new limit number of copies (limitation) you
want to set, and then press the SET key.
- Press the TOTAL (or COLOR ) key, key in the changed
limit number of outputs (7 digits), and press the SET key.
- Press the DISABLE key if the limitation to the new
department is not necessary.
1
2
3
4
5
6
7
8
9
10
11
12
6-27