Gestetner CS331 Copying Manual page 154

2. PROCEDURE OF SCAN SETTING (Cont.)
1 Press the ENABLE key, then change the file format
1
setting as required.
- Select a file format ( PDF , JPEG or TIFF ).
* When 'Scan to E-mail' and 'Scan to FTP' are set in
2
combination, the file formats of both become the same. If
either of them changes in setting, the another one changes
correspondingly.
3
2
If you want to send to the FTP server at the default
setting, press the SET key.
4
- The setting is completed. Skip to step 7.
- The FTP server at the default setting is set by the administrator
in advance.
5
6
3
If you want to change any FTP server (or the FTP
server is not set at the default setting), press the NEXT
key.
7
8
4 Set the FTP server name.
- Press the area
9
right to switch to the letter input screen. Enter the FTP server
name within 128 letters using the alphabet (touch panel)
and numbers (digital keys), then press the SET key.
10
You can enter the IP address directly instead of the FTP server
name.
11
5
Key in the FTP port number (0-65535).
12
6 Key in the connection time (0-300 sec.) in 'FTP Time
Out'.
- Press the NEXT key.
8-16
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
Page 8-26.
as shown on the screen on the