Gestetner CS331 Copying Manual page 162

3. ABOUT THE SETTING BEFORE SCANNING (Cont.)
Setting by the Administrator (Cont.)
6 Press the NEW key.
1
2
3
7 Set the template.
- Enter the file name as required, then press the DESTINATION
4
key to set the destination. Then press the SETTING key to set
the scanning condition. See steps 5 to 13 in page 8-4.
5
6
8 Press the SET key when the setting of the template is
completed.
7
8
9 Set the template name.
- Press the area
9
right to switch to the template name input screen.
10
11
12
8-24
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
as shown on the screen on the