Gestetner CS331 Copying Manual page 97

Single-feed Mode
1
Place paper in the drawer(s).
2 Press the PROGRAM key to enter the program
menu, and press the ADF key.
3
Press the SADF key.
Select other copy modes as required.
4 Place an original.
- The original is automatically pulled in and the screen
changes as shown on the right.
- If there are more originals, set them in the same way. (The
same operation is carried out whether or not you press the
YES key.)
5 After all originals have been fed through the
reversing automatic document feeder, press the
FINISHED key.
- Copying begins.
Page 2-4
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
6-3