2. PROCEDURE OF SCAN SETTING (Cont.)
1
Press the ENABLE key, then press the NEW key.
1
2
3
2
Enter the IFax address.
- Enter the IFax address within 80 letters using the alphabet
4
(touch panel) and numbers (digital keys), then press the
SET key.
- Use the following keys as required.
5
Backspace ...Press this key to delete a letter before the cursor.
Cancel
6
C Clear (control panel)...Press this key to delete all letters.
Maximum 10 IFax addresses can be set. Repeat steps 1 to 2
7
described above for the second and following addresses.
8
3
Confirm the entered IFax addresses.
- If 4 or more IFax addresses are set, confirm them using the
key and
9
10
11
To delete the entered IFax address
- Select the IFax address you want to delete, then press the
DELETE key.
12
8-14
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
...Press these keys to move the cursor.
...Press this key to cancel entry of letters and
go back to the screen in step 1.
key.