Table of Contents
Advertisement
Advanced Transmission Features
Transfer Request
Transfer Request allows fax machines
that have this feature to automatically
distribute incoming messages onto
multiple fax destinations. This feature
helps you save costs when you send
the same message to more than one
place in a distant area, and saves time
since many messages can be sent in a
single operation.
The diagram below may make the
concept clearer.
4
Requesting
party
Preparation
Before you can use this feature you
must program the Polling ID and
your G3 Direct Number (when the
optional G4 unit is installed, regis-
ter the G4 Fax Number).
"Registering ID Codes",
"Transfer Report"
Polling ID's of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
The following terminology is used in
this section.
Requesting Party
The machine where the message
originates from, i.e. the machine
making a Transfer Request (in this
section, this machine).
124
End Receiver
Transfer
Station
End Receiver
Transfer
Result Report
End Receiver
Transfer Station
The machine that forwards the in-
coming message to another desti-
nation, i.e. the machine that
receives the Transfer Request.
End Receiver
The final destination of the mes-
sage, i.e. the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Quick
Groups in the Transfer Station.
Limitation
The Transfer Stations you specify
must be machines of the same
make as this machine and have the
Transfer Station function.
You can specify up to 100 Transfer
Stations in a Transfer Request.
You can have up to 30 End Receiv-
GFCYUI0N
ers per Transfer Station. If you
specify a Transfer Station Group,
the Group counts as a single re-
ceiver.
The combined total of End Receiv-
ers and Transfer Stations you spec-
P.250
ify with the number keys cannot
P.252
exceed 100.
A
Set a document and select any
scan settings you require.
B
Press [Mode].
Dials,
Speed Dials
or
Advertisement
Table of Contents
