Table of Contents
Advertisement
length is about 0.79" or more, and re-
duces it if the excess length is within
about 0.79". When a message is split,
the split mark (*) is inserted at the
split position and about 0.39" of the
split area is duplicated on the top of
the second sheet.
A B C
(Document)
Note
Your service representative can
customize this feature with the fol-
lowing settings. Bracketed values
are defaults.
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (0.39")
• Guideline for split (when mes-
sage is 0.79" longer than paper)
You can adjust the overprinting
length and length of reduction
within the following ranges:
• Guideline for split: 0 – 6.1"
TSI Print
Usually the sender's TTI is printed on
received messages. If the sender has
not programmed their TTI, you will
When there is No Paper of the Correct Size
If there is no paper in your machine that matches the size of a received message,
the machine will choose a paper size based upon the paper you have available.
AB
BC
GFBUNK0N
not be able to identify them. Howev-
er, if you turn this feature on, the
sender's RTI(
P.21) or CSI (
is printed instead so you can find out
where the message came from.
Note
When the machine is shipped, this
feature is turned off by default.
Turn it on or off with the User Pa-
rameters.
P.236 "Changing the
User Parameters"
CIL/TID Print
The optional G4 Unit is required to use
this function.
Two features are provided for identi-
fication of messages received by G4
(ISDN). If turned on, this information
will be printed on every page. Turn
CIL and TID on and off with the User
Parameters.
P.236 "Changing the
User Parameters"
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number, name, the
sender's own fax number and name,
time, and page number. The default
setting is on. The TID refers to the
name registered by the sender in their
TTI. The default setting is off.
Limitation
This feature is available only when
receiving in G4 mode.
Note
You can turn CIL/TID on or off
with the User Parameters.
Printing Functions
P.243)
3
101
Advertisement
Table of Contents
