Table of Contents
Advertisement
to have multiple copies made of mes-
sages from particular senders.
Limitation
The maximum number of copies
that can be made of each message
is 9. If you are using Collate with
Specified Senders, the maximum
number is 9.
Only one set of prints is made
when using the following features:
• Confidential Reception
• Memory Lock Reception
• Polling Reception
Note
By default this feature is turned
off. Switch it on and set the num-
ber of copies with the Collate.
P.260 "Collate"
Note that the machine will use
Memory Reception for Collate.
Two In One
When two messages of the same size
and direction are received consecu-
tively, they are printed on a single
sheet when you turn this feature on.
This can help you economize on pa-
per.
• Two A5 K messages are printed
side by side on a sheet of A4 L.
1
• Two 8
printed side by side on a sheet of
17" L
11
GFPBUS0N
Limitation
This feature does not work with
messages larger than A4 K, or LT
K. When LT K size paper is load-
ed in the machine, each page of the
received message is output on a
single sheet.
If paper matching the size and di-
rection of a received document is
not available, Two In One is not
possible.
This feature is not available with
Polling Reception or when copy-
ing.
If the sent pages are of different
width, or were sent with different
scan settings, this feature is not
available.
Note
By default this feature is turned
off. Switch it on with the User Pa-
rameters.
User Parameters"
This feature uses Memory Recep-
tion.
Image Rotation
If you have installed paper in the cas-
sette sideways K, incoming fax mes-
Printing Functions
11 " K messages are
/
2
P.236 "Changing the
3
GFSYUI0N
99
Advertisement
Table of Contents
