Material Removal
1. After reaching the desired angle, the material needs to be removed.
2. Press the reverse (left) foot pedal. Both the die and the counter die will retract
simultaneously. Run in reverse until all bending pressure is released from the bend.
3. Activate the quick release counter die lever (A) and completely remove the material.
4. After the material is safely removed, press the reverse (left) foot pedal keeping hands clear
until both cylinders fully retract.
5. The machine is now at the "home" position and can be reloaded for the next bend.
6. Repeat previous steps.
Activating the quick release lever
21
21
A