Baileigh Industrial B8105 Operator's Manual page 21

H Spindle
I Die Drive Pins
J 1/2-13 Tapped holes for bolting
down dies
K Center Pin
L Hitch Pin
4. To install the counter die, remove
the hitch pin and insert the counter
die in the opening in the counter die
mount until the 3/4" holes line up.
5. Now insert the hitch pin through all
the holes, reinstall clip on the hitch
pin with the engraved side of the
counter die facing up.
IMPORTANT: Be sure the
long end of the counter die points away from the
hook arm, or to the right of machine.
K
J
I
H
18
18
L