Using Job Accounting; Login/Logout - Kyocera ECOSYS M5526cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting

Using Job Accounting

This section explains procedures while setting job accounting.

Login/Logout

If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Login
When the screen for entry of account codes on the machine appears, perform the following.
1
2
Logout
When the operations are complete, select the [Authentication/Logout] key to return to the account ID entry screen.
Enter the account ID using the numeric keys > [Login]
NOTE
• If you entered a wrong character, select the [Clear] key and enter the account ID again.
• If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.
• By selecting [Check Counter], you can refer to the number of pages printed and the
number of pages scanned.
When the screen to enter the login user name and password appears
If user login administration is enabled, the screen to enter the login user name and password
appears. Enter a login user name and password to login. If the user has already registered the
account information, the account ID entry would be skipped.
Adding a User (Local User List) (page 9-5)
Proceed to complete the rest of the steps.
9-41