Kyocera ECOSYS M5526cdn Operation Manual page 359

Troubleshooting > Troubleshooting
Message
Cannot print the
specified number of
*1
copies.
Cannot process this
*1
job.
Cannot recognize.
Cleaning the laser
scanner...
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-40)
Checkpoints
—
Do you want to print the data stored
in the USB memory?
―
―
—
10-18
Corrective Actions
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Uncheck [RAM Disk] in the
[Device Settings] tab of the
printer's properties.
NOTE
If you unchecked the [RAM Disk],
check the [RAM Disk] again after
the printing is completed. If not,
print speed may be reduced.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Reduce the number of copies to
be printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
• Select [Copy Priority] of
Optional Memory in System
Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [End].
Make sure your ID card has been
registered.
The machine is under the
adjustment to maintain its quality.
Please wait.
Reference
Page
—
―
Card
Authentication
Kit(B)
Operation
Guide
―