Kyocera ECOSYS M5526cdn Operation Manual page 361

Troubleshooting > Troubleshooting
J
Message
Job Accounting
restriction exceeded.
K
Message
*1
KPDL error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-40)
L
Message
Low temperature. Adjust
room temp.
M
Message
Machine failure.
Maximum number of
scanned pages.
Memory card error.
Checkpoints
Is the acceptable printing count
restricted by Job Accounting
exceeded?
Checkpoints
―
Checkpoints
—
Checkpoints
―
Is the acceptable scanning count
exceeded?
—
10-20
Corrective Actions
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Select [End].
Corrective Actions
PostScript error has occurred. The
job is canceled. Select [End].
Corrective Actions
Adjust the temperature and the
humidity of your room.
Corrective Actions
Internal error has occurred. Make a
note of the error code displayed on
the screen, and contact your
Service Representative.
Only one copy of the scanned pages
is available. Select [Continue] to
print, send or store the scanned
pages. Select [Cancel] to cancel
printing, sending or storing.
An error has occurred on the
memory card. Job is canceled.
Select [End].
The error cord is as follows.
04: Insufficient space on the
memory card to complete this
operation. Move data or delete
unneeded data.
Reference
Page
―
Reference
Page
―
Reference
Page
—
Reference
Page
―
—
—