Call Screening - AT&T CL84367 Complete User's Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be heard over
the speaker when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by pressing PHONE/
/SPEAKER or lifting the corded handset on the telephone base.
To change the setting:
Using a cordless handset or the telephone base:
1. When the telephone is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
/SELECT.
press
MENU
3. Press q or p
CID
/SELECT.
press
MENU
4. Press /SELECT to select Call screening.
MENU
5. Press q or p
CID
6. Press /SELECT to save the setting. You hear a
MENU
confirmation tone.
Note: For more information on call screening, see page 116.
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
on a cordless handset, or pressing
FLASH
SELECT
110
Answer ON/OFF
>Ans sys setup
to
Call screening
>
# of rings
CALL SCREENING
>On
fffff
Voice guide
>Ans sys setup
Call screening
>
# of rings
CALL SCREENING
>On
fffff
p
q
p
q
p
q